Allied Manta Installationsanleitung PDF herunterladen (Seite 21)

AVT camera cleaning instructions

Manta Hardware Installation Guide V4.1.0

3. If the impurity is neither on the lens nor the IR cut filter/protection

glass, it is probably on the sensor.

Cleaning Instructions

Perform all cleaning operations (lenses, filter/protection glass, sensor in a

dust-free clean-room. The optical components are very fragile so it is impor-

tant to avoid touching them with your fingers or any hard material.

1. Unplug the camera from any power supply before cleaning.

2. Apply a small amount of optics cleaner (60% ethyl alcohol, 40% ether)

to clean, new lens cleaning tissue.

Acceptable material includes medical-grade sterile optical cotton, or

lens tissue that is chemically pure and free from silicones and other

additives.

– Do not use cosmetic cotton.

– Do not use consumer eyeglass cleaning cloths pre-treated with sili-

con.

Note



• Taking out the filter requires special care.

• Ask your dealer to help you if you are not confident

with the procedure.

Figure 3: Removing IR cut filter/protection glass using special tool (E9020001)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 60 61

Keine Kommentare

Allied Manta Installationsanleitung Seite 21